Assembly is simplicity itself:

• Connect the main fibreglass rods and slide through two sleeves in the fabric, inserting the ends into the "feet" in the base panel.
• Next, place the smaller rods into the eyelets in the front and rear panels to stretch the two arcs apart.

The product can be installed in a wide variety of locations.
The outer edge of the rear panel has multiple fixing points.
Drill holes and secure the back panel to the wall or fence with the plastic wall plugs and screws provided.

A number of weight bags are included. These may be filled with sand or pebbles and placed along the edges of the ground sheet inside to prevent the wind from blowing underneath. For a more permanent and robust solution you may wish to place a number of paving slabs or wooden blocks over the groundsheet.

*The product has a velcro detachable rear panel, through which one can fit the optional wall mounted security bracket - available separately, see 'Essential Extras'. The 'Anka Point' is a steel fixing, which comes with a set of 'one way' clutch head type security screws and plastic wall plugs to provide a serious security solution. Attached to your wall or fence this creates a permanent fixture to anchor your goods with a padlock and chain or cycle lock.